Knowing When to Get Your Lathe Machine Fixed

Written by cartalk on . Posted in Industrial equipment repair, Portable material hoist, Power tool repair service

Machining is an ancient aspect of manufacturing around the world, and a modern lathe machine can get a lot of work done at the workplace. However, like any other piece of hardware, a lathe may sometimes suffer from maintenance issues or wear and tear, so machine shop repair is a must so that a lathe and other tools can be restored to fine working order. What is the cost of rebuilding tools today? That may vary, based on the particular damage to a lathe or similar device, and a tool owner may check the cost of rebuilding tools when they are about to get it fixed and put back in shape. The cost of rebuilding tools may be high enough in some cases so that the machine can or even should simply be replaced, but that may be a rare case. More often, a lathe is a tough machine that will need some work to get back in shape, and the cost of rebuilding tools can be a fine investment to keep production going. The cost of rebuilding tools, then, is a natural part of owning a factory or similar site. Just what can be expected from a working lathe machine today? What might go wrong?

Basics of Lathes

The concept of a lathe goes back several millennia, given both the simplicity and necessity of its work. Lathes powered by steam or water wheels appeared during the Industrial Revolution, and today’s lathes are often electrically powered, but manual ones have been found among ruins of ancient Egypt and China, and sometimes other sites as well. According to the online magazine Bright Hub Engineering, a lathe, like other machining tools, is responsible for grinding, sawing, planning, drilling, and reaming. This makes them flexible and effective devices both then and now, and in older times, they were used for both tools and weapons of war. Today, rather than sharpening swords, lathes are electric devices used to assist manufacturing of all kinds, such as removing metal burrs from machined pieces of metal big or small.

Although lathes are often used for metalworking, they can also be used for glass work or even with wood. With these materials, they can perform sanding, drilling, cutting, and knurling as needed to help make for a finished product at a manufacturing site. After all, it is not enough to merely assemble materials to make a car or a toaster; the materials involved must be in the right shape. Drilling can be done to create holes for nuts and bolts, screws, or for threading wires and cables through the material. In other cases, lathe machines may also remove imperfections in the material, whether it be metal, wood, or glass. A metal burr, for example, is a raised imperfection on the surface of metal, such as from welding or drilling. Metal burrs are an issue because during the movements of a finished product, they may attract static electricity, or they may scrape against and scratch other surfaces. This is never to be desired, so a lathe machine can remove such imperfections and create a smooth, flawless surface.

Lathe Anatomy and Repair

Fixing a lathe means knowing what parts come together to form such a device. First is the bed, or the platform where the rest of the hardware can be found, and the bed is held with several legs that raise the bed to an acceptable height. The headstock, meanwhile, contains the high precision bearings responsible for hosting the spindle, or the horizontal axle. The axle, in turn, is a hollow horizontal axle with interior and exterior threads on the inboard. Woodworking pieces can be mounted on the inboard during work.

Also, the counterpart to a headstock is the tailstock, and it hosts a non rotating barrel that the user can slide in and out. the tailstock is placed directly in line with the head stock and is parallel with the bed. The tool rest, meanwhile, is where the machined tool is held, and the tool post holds the cutting tool in place during operation. The breakdown of any of these pieces may call for expert repair, and anything worn down, stuck, or loose should be looked at right away.

Leave a comment

You must be logged in to post a comment.